25
ita
gre
esp
por
dan
nor
sve
suo
de
ned
eng
fra
1. Disconnectthenozzlefromthetube.Usethehose
handle to clean the nozzle.
2. If the wheels are stuck, clean them by removing the
wheel cap with a small screwdriver.
3. Unscrewthewheelaxisandcleanallparts.Retin
reverse order.
Cleaning the AeroPro nozzles / Nettoyage du suceur Aeropro
CleaningtheAeropromotorizednozzle/NettoyagedelabrosseélectriquemotoriséAeropro
Always disconnect the nozzle before cleaning it. / Toujours désassembler le suceur avant de le nettoyer.
1. Open brush roll cover by pushing the latches. This
will free the front wheels for cleaning.
2. Pull out the brush roll and remove entangled threads
bysnippingthemawaywithscissors.Usethehose
handletocleanthenozzle.Retinreverseorder.
3. If the wheels are stuck, remove them carefully by
using a small screwdriver and clean the wheels.
Cleaning the AeroPro nozzles / Nettoyage du suceur Aeropro
1. Désassemblerlesuceurdutube.Utiliserlapoignéedu
exiblepournettoyerlesuceur.
2. Si les roues sont bloquées, les nettoyer en retirant
leur cache à l’aide d’un petit tournevis.
3. Dévisserl’axedesrouesetnettoyertouteslespièces.
Remonterdansl’ordreinverse.
1. Ouvrir le couvercle de la brosse rotative en
poussant les loquets.Cecilibèrelesrouesavant,qui
peuvent être nettoyées.
2. Retirerlabrosserotative,puisenleverleslsemmêlés
enlescoupantavecdesciseaux.Utiliserlapoignéedu
exiblepournettoyerlesuceur.Remonterdansl’ordre
inverse.
3. Si les roulettes sont bloquées, les retirer délicatement
avec un petit tournevis, puis nettoyez-les.
UltraOne_EN-GR_130227.indd 25 2013-03-18 17:28:05