Do you have a question about the Electrolux WA SL3 M and is the answer not in the manual?
Brand | Electrolux |
---|---|
Model | WA SL3 M |
Category | Washer |
Language | English |
Read and keep this manual. Qualified tradesmen for electrical/plumbing work. Remove transit screws before use.
Activate child lock by holding START/STOP button for three seconds to prevent accidental presses.
Door opens electrically and requires power supply. Emergency opening details are in Troubleshooting.
Shuts off water intake and pumps out water if the level rises above normal.
Specifications include dimensions, weight, drum capacity, load capacity, spin speed, power rating, and water pressure.
Details of Euro and Medical programmes, including max load, pre-wash, main wash, rinse, spin, and duration.
Instructions to remove transit screws and install rubber spacers to protect holes.
Guidance for built-in and free-standing placement, including required gaps around the machine.
Requirements and steps for connecting the machine to the water supply using the provided hose.
Instructions for connecting the drain hose to a sink, floor drain, or gutter.
Details on 3-phase and single-phase power supplies, fuse ratings, and earth leakage circuit breaker type.
Guidance on reconfiguring the machine for different power supplies as shown in the wiring diagram.
Instructions for connecting a coin mechanism using a special cable.
How to adjust the preset wash temperatures for different washing programs.
Procedure to change the language of the displayed text on the machine.
How to activate or deactivate the child lock function for the START/STOP button.
Steps to clean the trap and drain pump to remove debris.
Instructions for removing and cleaning the detergent drawer and its compartments.
Method to remove greyish white deposits from the wash drum using citric acid.
Summary of recommended maintenance tasks and their intervals.
Troubleshooting steps for issues preventing the washing machine door from opening.
Guide to diagnose why the washing machine is not starting.
How to interpret and clear common error messages displayed on the machine.
Instructions to revert the display language to the original setting.
Essential safety precautions for operating the tumble dryer, including electrical work.
How to activate and use the child lock feature on the START button.
Explanation of the thermal cut-out that switches off the machine if it overheats.
Information regarding noises or phenomena expected during the initial use of the dryer.
Specifications for the tumble dryer, including dimensions, weight, capacity, and speed.
Details on drying programs: Extra dry, Dry, Normal dry, Iron dry, with temperature and duration.
Options for installing the dryer: free-standing, built-in, or stacked on a washing machine.
How to adjust the feet to ensure the tumble dryer is level and stable.
Guidance for connecting the dryer to a ventilation duct or wall outlet.
Step-by-step instructions to reverse the door hinge from left to right side.
Details of the dryer's factory configuration, heating output, and fuse ratings.
How to reconfigure the dryer for single-phase power supply options (10 A or 16 A).
Wiring instructions for connecting the dryer and washing machine for uniform phase load.
Procedure to change the language displayed on the tumble dryer interface.
How to lock or unlock specific drying programmes.
Steps to activate or deactivate the child lock feature on the dryer.
Instructions for cleaning the tumble dryer's fan annually.
Steps for cleaning the tumble dryer's condenser unit regularly.
Procedure for emptying the condensation water tank after each drying cycle.
Summary of recommended maintenance tasks and their frequencies.
Troubleshooting steps if the tumble dryer fails to start, checking door, power, and fuses.
Explanation of the overheat protection and actions to take if it triggers.
Reasons for slow drying (clogged filters, room temp) and solutions.
How to interpret and clear various error messages displayed by the dryer.
The primary helpline number for Electrolux product service and support.
Information on purchasing spare parts from designated sales points.
Details of the one-year warranty for products purchased and used in Switzerland.