To Next PageTo Next Page
Need help?Do you have a question about the Electronics International EDC-33 Series and is the answer not in the manual?
General| Brand | Electronics International |
|---|---|
| Model | EDC-33 Series |
| Category | Media Converter |
| Language | English |
Overview of the EDC-33xx unit, its dimensions, connectors, and function.
Details on EDC signal processing, parameter configuration, and model numbering.
Describes the single operating mode and self-test procedure of the EDC unit.
Explains the VSI light on the EDC for status indication and error decoding.
Step-by-step guide for unboxing, inspecting, mounting, and wiring the EDC unit.
Details on factory setup, calibration procedures, and required customer worksheets.
Information on periodic maintenance, continued airworthiness, inspection intervals, and service life.
Discusses limitations, TSO requirements, and installation within aircraft airworthiness regulations.
Lists TSO authorizations and applicable Minimum Performance Standards (MPS) for the EDC.
Details tests conducted for temperature and altitude as per DO-160G Category C4.
Describes shock and crash safety tests conducted to Category B Type 5F.
Covers vibration testing performed to Category R, Curves C1 for robust testing.
Details tests for power input, voltage spike, audio, and induced signal susceptibility.
Covers RF susceptibility/emission, lightning, ESD, and fire resistance tests.
Lists EDC models and their environmental design/testing to TSO DO-160G.
Outlines the TSO standards the EDC meets, including C43c, C44c, C45b, etc.
Specifies power input voltage range and communication port configuration.
Details accuracy, voltage inputs, pulse inputs, output supplies, and temp compensation.
