To Next PageTo Next Page
Need help?Do you have a question about the Electroswitch 31201B and is the answer not in the manual?
General| Brand | Electroswitch |
|---|---|
| Model | 31201B |
| Category | Switch |
| Language | English |
Specifies current ratings for AC and DC circuits at various voltages and frequencies.
Details overload operations and minimum voltage breakdown rating for the switch.
Lists minimum insulation resistance and maximum contact resistance values.
Indicates that electrical life details are provided on Page 3.
Defines the range of sections, poles, and adjustable positions for rotation.
Describes contact configurations (break-before-make, make-before-break) and indexing action.
Specifies panel mounting method and standard panel thickness compatibility.
Details the materials used for rotor and stationary contacts.
Notes that additional contact assemblages are available upon request.
Explains how to specify make-before-break (shorting) contacts by adding '-S'.
States that nameplates are optional and incur additional cost.
Shows Assemblage 2 configuration and lists nominal torques, weights, and depth.
Illustrates Assemblage 3 and its associated depth behind panel.
Provides critical dimensions for mounting the switch panel.
Details mechanical cycling, application-oriented testing, and destruction testing.
Explains UL recognition and CSA certification processes and requirements.
Outlines tests for overload, endurance, temperature rise, dielectric strength, and spacings.
Presents life test results for alternating current in resistive and inductive loads.
Shows life test results for direct current in resistive and inductive loads.
Explains how catalog numbers define switch configuration and features.
Describes codes for variations and how to order special purpose switches.
Illustrates the contact configuration for Assemblage 2.
Shows the contact diagram for Assemblage 3.
Details the make-before-break only contact configuration for Assemblage 11.
Presents contact diagrams for Series 21 switches.
Shows contact diagrams for Series 24 and 31 switches.
Illustrates the double-break switching configuration for Assemblage 1.
Shows the triple pole, double-break switching for Assemblage 5 (Series 25).
Details the cumulative tap switch, make-before-break configuration.
Presents the double-break switching configuration for Assemblage 7.
Shows the configuration for common source circuit feeding pairs for Assemblage 8.
Illustrates Assemblage 10, similar to 3 but with 'On' first position.
