Electrovision B429BL User Manual

B429BL
e-audio Bluetooth 4.0 Stereo
Audio Amplier 2 x 30W
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product for future reference.
BEFORE USE
You must inspect the product and its power supply for any signs of damage. If the product or
power supply is damaged, DO NOT use it, and contact your supplier immediately.

Electrovision B429BL Specifications

Power

input voltage	230 V
output voltage	12 V
output current	2 A
power	2 x 30 W @ 4 Ω

Audio

signal-to-noise ratio	≥90 dB
bluetooth version	4.0

Weight and Dimensions

weight	50 g
dimensions	27x41x118 mm

Summary

Important User Information

Installer and User Notes

Key instructions for installers and users, to be kept for future reference.

Before Use Inspection

Check the product and power supply for damage before initial use.

Safety and Compliance

Product Safety Precautions

Guidelines for safe operation, including age restrictions and environmental considerations.

General Safety Requirements

Mandatory periodic electrical safety checks and recommendations for building safety.

Connecting the Amplifier

Speaker Connection Guide

Detailed steps for connecting speakers to the amplifier using euro block terminals.

Operation and Specifications

Device Syncing Procedure

Instructions for pairing your mobile device with the Bluetooth amplifier.

Technical Specifications

Key technical details including weight, dimensions, power, SNR, and Bluetooth version.

Cleaning and Warranty

Guidance on cleaning the unit and information on the service warranty.