Need help?Do you have a question about the ELEGANT BF Series and is the answer not in the manual?
Inspect product for transit damage upon receipt. Handle glass carefully to avoid knocks and shock loading.
Safety glass cannot be re-worked. Read instructions carefully before installation and handle with care.
Clean shower with soap and water. Avoid abrasive cleaners and strong chemicals.
Comprehensive list and diagrams of all parts required for assembling the BF Series shower door.
Assemble initial components using parts (11), (12), (13), (18), (19), (20).
Attach wall profiles and other fittings using parts (8), (9), (12), (13), (14), (19), (20).
Join glass panels to wall profiles (7/A), (7/B) using parts (14), (15), (19), (20).
Apply lubricating oil to parts (10) and fit rubber strips (8).
Adjust the door height using parts (12)/(24) for proper fitting.
Fix wall channels (6) to the wall structure.
Mount the assembled doors onto the wall channels using wall anchors (3).
Secure the side panel frame with screws (5) and wall anchors (4) using drill bit Ø3.2mm.
Fix decorative covers (4) using screws (5) and drill bit Ø3.2mm.
Install decorative covers (21), (22) and handle components (16).
Apply silicone sealant on the outside edge and allow 24 hours to dry.
General| Category | Bathroom Fixtures |
|---|---|
| Material | Brass |
| Installation | Single Hole |
| Water Flow | 1.2 GPM |
| Finish | Chrome |
To Next Page