Start using
1. Take out the connector hose and connect it to the extension port of the 3D printer.(Screws and
wrenches are in the accessories package)(See Picture 1)
2. Remove the connector hose and connect it to the air purifier and the 3D printer. (See Picture 2)
(Picture3） (Picture4）
(Picture1）
(Picture2）
Instructions for Use
3. Plug in the adapter to power on the machine, and the buzzer will make a "ding" sound.
(See Picture 3)
4. Touch the power switch button to turn on the machine. (See Picture 4)
To Next Page
Loading...