To Next PageTo Next Page
Need help?Do you have a question about the Elektra Beckum HC 260 and is the answer not in the manual?
General| Planing width | 260 mm |
|---|---|
| Max planing depth | 3 mm |
| Shaft speed | 6500 rpm |
| Number of knives | 2 |
| Cutter Block Speed | 6500 rpm |
| Feed Speed | 5 m/min |
| Table size | 260 mm |
| Thicknessing table size | 260 mm |
Lists detailed specifications including dimensions, capacities, speeds, and noise levels.
Guidelines for connecting single-phase machines, including voltage, earthing, and fuse requirements.
Guidelines for connecting 3-phase machines, including voltage, earthing, and fuse requirements.
Important information on earthing and color coding for single and 3-phase connections.
Details on the motor protection relay and how to reset it after overload.
Steps for planing stock, including setting the cutter guard height.
Detailed steps for removing, cleaning, and fitting disposable blades, including setting projection.
Instructions for fitting HSS or TCT resharpenable blades using a conversion kit.
Essential checks for blade security, guard operation, and safety earthing.
Key safety rules including dust collection, eye protection, and cut depth limits.
