Need help?Do you have a question about the Elektra Beckum hobbymaster MIG/MAG 160 and is the answer not in the manual?
General| Welding process | MIG/MAG |
|---|---|
| Input Voltage | 230V |
| Output Current Range | 30-160A |
| Welding Wire Diameter | 0.6 - 0.8 mm |
| Rated Input Current | 16 A |
| Protection Class | IP21 |
| Wire Feed Speed | 2 - 15 m/min |
Hazards from welding fumes and metal dust, need for ventilation and respirators.
Arc radiation causing eye/skin damage; need for proper eye protection.
High arc temperature risks, removing combustibles, fire extinguishing equipment.
Safe handling of gas cylinders, protection from damage, and proper size.
Setup requirements for dry surroundings, sufficient cooling, and indoor use.
Connecting to mains power, checking voltage, and setting switch to '0'.
Connecting the gas cylinder, pressure reducer, and setting gas flow rate.
Connecting the earth clamp and preparing workpieces for welding.
Adjusting voltage and wire feed for optimal welding results.
Provides guidelines for shaping different types of welded joints.
To Next Page
