Need help?Do you have a question about the Elem Garden Technic DCBT43D-16 and is the answer not in the manual?
Read the instruction manual to familiarize yourself with handling. Users insufficiently informed risk danger due to improper handling.
Protective equipment and clothing must be used during operation to avoid injuries and protect hearing.
Read the manual carefully to become familiar with handling the trimmer. Use only for specified purposes.
Keep body parts away from the cutting blade when the engine is running. Do not start the trimmer in an incorrect working position.
Use blade with extreme caution. Rebounds can occur when the blade contacts an uncuttable object, causing violent movement.
Handle fuel with care as it is highly flammable. Always refuel outdoors, away from open flames or sparks.
This tool uses a two-stroke engine requiring pre-mixed gasoline and 2-cycle oil. Mix thoroughly before each supply.
Clean the filler cap area, loosen slowly to release pressure, and avoid spilling fuel. Do not overfill.
Ensure blade guards are in place. Secure the machine with rope when transporting by vehicle. Avoid carrying on rough roads.
Ensure a first-aid box is available. Provide necessary information when asking for help after an accident.
Prolonged vibration can cause circulatory issues. Keep hands warm and take breaks to mitigate risks.
Marks indicate critical points for preventing serious bodily injury or death, or for mechanical failure.
Read the manual, understand proper operation, and never use under the influence of alcohol or fatigue.
Wear proper clothing and protective equipment like helmets, goggles, gloves, and boots.
Assemble handles, throttle wire, and adjust throttle cable. Ensure proper connection for safety.
Instructions for installing nylon cutters and metal blades onto the gear shaft.
Attach the safety guard to the gear case securely with the provided bolts.
Inspect engine, move choke lever, pull starter rope, and allow engine to warm up gradually.
Return throttle lever to idling position and push the engine switch button to stop.
Guide the cutting head from right to left. Use blade tip for tough weeds and young grass.
Best cut is up to 1/3 from the edge for shrubs and tough weeds. Use up to 2/3 from tip for young grass.
Includes checks for Air Cleaner, Fuel Filter, Spark Plug, Intake Air Cooling Vent, and Gear Case.
Includes cleaning the Muffler and its exhaust vent for carbon buildup.
Screw adjusts engine rotation at lowest speed. Clockwise increases rotation, counterclockwise decreases.
Information on general service, storage, and guarantee policies. Use only qualified personnel and original parts.
Details on repairs, warranty, and application support services. Tampering invalidates warranty.
General| Power Source | Petrol |
|---|---|
| Engine Type | 2-stroke |
| Cutting Width (with blade) | 255 mm |
| Cutting Width (with line) | 430 mm |
| Fuel Tank Capacity | 1.2 L |
| Cutting Width | 430 mm |
| Weight | 7.8 kg |
| Shaft Type | Straight |
| Starter Type | Recoil |
| Engine Displacement | 42.7 cc |
To Next Page
