To Next PageTo Next Page
Need help?Do you have a question about the elem ELCOMPACT-2 and is the answer not in the manual?
General| Power source | Electric |
|---|---|
| Maximum immersion depth | 7 m |
| Cable length | 10 m |
| Frequency | 50 Hz |
| Protection Class | IPX8 |
| Type | Submersible |
| Maximum flow rate | 7500 l/h |
| Power consumption | 400 W |
| Power | 400 W |
| Voltage | 230 V |
| Max Flow Rate | 7500 l/h |
Details on correct pump priming and vertical installation of the COMPACT 2, including recommended accessories for network connection.
Guidance on water column limits, minimum pump pressure, and adjustment of starting pressure based on height.
Instructions for checking power supply and making electrical connections, including options for 3-phase pumps.
Explanation of how the device attempts to restore operation after a failure without manual intervention.
Step-by-step guide for priming the pump and connecting the COMPACT 2 to the electric supply.
Common issues like pump not stopping or not starting, with troubleshooting steps and LED indications.
Instructions for mounting the optional pressure gauge onto the device using screws.
Information regarding replacement of damaged parts and contact for after-sales service.
Provides company address, telephone, fax, and after-sales service (SAV) contact information.
Guidelines for storing the product safely, in a cool, dry place away from direct sunlight.
Information on warranty terms and responsible disposal of the machine after its extended use.
