Element Enduro Sendero User Manual

QUICK START GUIDE
GATE 01
QUICK START GUIDE
GATE 02
QUICK START GUIDE
GATE 03
01
111998
Battery Charging Steps and Safety:
Remove the battery from the vehicle before charging.
Place battery on a fi re resistant surface.
Avoid any contact with water or other liquids.
Be sure to select the correct charging mode for the type
of battery you are charging.
ALWAYS use a compatible charger for charging your batteries.
Caution: Never leave the battery unattended while charging.
Always disconnect the charger from the power source when fi nished charging.
Caution: Always disconnect the battery when you are
fi nished driving the vehicle.
Battery Installation:
1. Install the battery in the battery tray.
2. Secure the battery using two hook and loop straps.
Peak Detection
Quick Charger
Battery Notes and Tip:
Connect the battery as shown.
Disconnect the battery when not in use!
LiPo: LiPo batteries (lithium polymer) are high current
rechargeable batteries. LiPo batteries offer extended run time and peak performance over
NiMH batteries. They require a peak detection charger designed specifi cally for LiPo batteries.
These batteries require special care and handling.
LiPo batteries are recommended for advanced users only!
ALWAYS charge a LiPo battery in LiPo mode.
21

Element Enduro Sendero Specifications

General

Scale	1/10
Drivetrain	4WD
Completion Level	Kit
Motor	Not included
Battery	Not included
Radio	Not included
Vehicle Type	Rock Crawler

Summary

Battery Charging Steps and Safety

Charging Safety and Best Practices

Ensure safe charging by using compatible chargers, proper surfaces, and disconnecting when finished.

Battery Installation

Battery Installation Process

Install the battery into the tray and secure it using hook and loop straps.

Battery Notes and Usage Tips

Battery Connection and Disconnection

Connect battery as shown and disconnect when not in use for proper maintenance.

LiPo Battery Specifics

Details on LiPo batteries, their performance, charging requirements, and safety for advanced users.

Radio System Battery Installation

Transmitter Battery Installation

Install AA batteries into the transmitter, ensuring correct polarity and secure closure.

Radio System Tuning and Controls

Transmitter and Vehicle Power-On Sequence

Follow the correct power-on sequence for transmitter and vehicle to avoid damage.

Radio Control Adjustments

Adjust steering trim for straight wheels and understand throttle/reverse controls.