First cylinder (1-245, default 1): (press Enter)
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-245, default 245): +50
Command (m for help): t
Selected partition 1
Hex code (type L to list codes): c
Changed system type of partition 1 to c (W95 FAT32 (LBA))
Command (m for help): a
Partition number (1-4): 1
===========================================================================
=====
Create the Linux partition for the root file system.
===========================================================================
=====
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (52-245, default 52): (press Enter)
Using default value 52
Last cylinder or +size or +sizeM or +sizeK (52-245, default 245):(press
Enter)
Using default value 245
===========================================================================
=====
Print and save the new partition records.
===========================================================================
=====
Command (m for help): p
Disk /dev/sdc: 2021 MB, 2021654528 bytes
255 heads, 63 sectors/track, 245 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 51 409626 c W95 FAT32 (LBA)
/dev/sdc2 52 245 1558305 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
To Next Page
Loading...