EasyManua.ls Logo

Elenberg DVDP-2448 - Page 75

Default Icon
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Setup
Select Rear Speaker
With “Downmix” offˈcan choose “Large/Small or off” items for the “Rear
Speaker”.
¡ “Large” means complete frequency audio speaker˗“ Small” means high
frequency speaker. Use actual speakers configuring to adjust supper low
frequency. If small speaker is connected, don’t choose “Large” setting,
otherwise a high volume will damage the speaker.
¡ “CPlay speaker”, “Rear speaker ” setting must be done under the condition
of “Downmix” being with 5.1CH”. change 5.1 to OFF
Select Subwoofer
To choose “On/off” for the subwoofer means: “On “, the woofer is used.
Select Test Tone
With 5.1 operating ˈchoose “On”, will check 5 CHs in turn.
¡ The checking must be done with no disc in the unit and under the condition
of “Downmix” being with “5.1CH”. change 5.1 to OFF
¡ Using this function can check all CHs if their linkage with sound box is
correct or wrong.
Select Dialog
With “Audio output mode”, and choose “LT/RTǃstereo ”ˈthen under the
“Speaker Setup Page ”
you can select “Dialog ” item and adjust volumes.
¡ While playing 5.1CH disc, can adjust speakers volumes via “dialog”.
Select Post DRC
Dynamic compress output can lower volumes processing sound effect under
the conditions of within speakers max output. The item is divided into “On offǃ
auto”.
75

Related product manuals