What to do if my Elenberg DVD Player has no picture?
If your Elenberg DVD Player shows no picture, first ensure that your TV video setup is correct. If the setup does not match the actual connection, press the [V-MODE] button until the picture reappears. Also, check that the video cable is securely connected.
Why my Elenberg MC-4080 DVD Player has no power?
If your Elenberg DVD Player has no power, make sure the power cord is properly connected. Also, check the fuse; if it's melted, replace it with one of the same specification.
Details the layout and functions of buttons and indicators on the front panel.
Identifies ports and connectors available on the back of the device.
Explains how to connect the DVD player for video output using various cable types.
Details the methods for connecting the DVD player's audio output to sound systems.
Covers display, language, audio output, and screen saver settings.
Options for configuring audio output channels and downmixing for surround sound.
Settings for Dolby Digital audio features, including dual mono options.
Options for configuring video output formats like composite, YUV, RGB, and VGA.
Settings for TV system, audio, subtitles, language, and parental controls.
Allows setting access levels to control content playback for children.
Resets the device to its original factory settings.
Enables changing or managing the device's password for security.
Explains how to use the karaoke feature, including microphone and echo settings.
Instructions for viewing picture files from a CD disc, including preview and navigation.
Details how to tune into AM/FM radio stations and manage presets.
General| Remote Control | Yes |
|---|---|
| USB Port | Yes |
| Media Type | DVD |
| Audio D/A Converter | 24 bit / 96 kHz |
| Video D/A Converter | 10 bit / 27 MHz |
| Surround Sound | Dolby Digital |
| Audio Output | Stereo |
| Power Supply | 220V, 50Hz |
To Next Page