System Setup
Select LPCM Output
Can select LPCM output with frequency out of 48K, 96K or 192k.
Dolby Digital Setup
Press “W” to back to the audio setting pageˈin the audio setting page menu,
moveŸǃź
direction buttons to choose “ Dolby digital setting”ˈpress ǏPlayǐto Play the
Dolby Setup
page menuˈand pressŸǃź to choose Dual Mono, Dynamic item.
Dual Mono
Dynamic
Dual Mono (1 + 1)
Stereo
L-Mono
R-Mono
Mix-Mono
- - Dolby Digital Setup - -
Select Dual Mono
“Stereo”˖stereo output signal˗
“L-Mono”˖ left output signal˗
“R-Mono”˖ right output signal˗
“Mix-Mono” :left and right output average signal.
Select Dynamic Compression
In “Dolby Digital Setup”, select “Dynamic” itemˈpress “Play” to Play the
selection, moveŸǃź to do the settingˈthe compression ratio more great, the
less difference between high sound and woof. This item is only available to
the Dolby sound source.
Channel Delay Setup Page
77
To Next Page
Loading...