Elenco Electronics GF-8026 User Manual

Provides an overview of the manual's content and Section 1's scope.

Details technical specifications for generator and counter sections.

Outlines essential safety precautions for instrument operation.

Lists the items included with the instrument.

Introduces installation, inspection, and preparation procedures.

Guides on inspecting the instrument for damage upon arrival.

Covers power requirements, voltage selection, and power cord.

Lists important safety precautions before and during operation.

Explains how to select and identify basic waveforms.

Details selecting the correct frequency range using the control.

Describes using external voltage to control output frequency.

Explains adjusting output voltage amplitude and attenuation.

Details adjusting the DC offset level of the output signal.

Explains adjusting waveform duty cycle symmetry.

Covers enabling and adjusting internal frequency sweep.

Describes the TTL level output signal and its capabilities.

Explains changing output impedance between 50 and 600 ohms.

Details using the instrument as an external frequency counter.