●How to Charge
1. To charge when the projector is o:
When the projector is connected with the power adapter, put the
switch in the “OFF” position, it means it is charging.
2. To charge when the projector is on:
When the projector is connected with the power adapter, put the
switch in the “ON” position, and press the switch, the charging icon
will be displayed on the upper right of the main interface, it means
it is charging.
Tips:
• Please charge the battery with the original power adapter;
• The product is only suitable for a low temperature environment;
• When it is charging, do not block the battery cooling holes;
• Please don’t stab or crash the battery when it is charging;
• Do not get the battery wet.
Attention: This function is only for projector with battery.
13
14
●Safety Instruction
Installation
You can place the projector on almost any at surface to enjoy your movie
time. Keep these considerations in mind as you select a projector location:
• Place the projector on a sturdy, level surface.
• Use this projector in a dark room to get the better watching.
• Please use this projector carefully, dropping or crash may damage parts or
result in blurred image, abnormal displaying.
Power
• Be careful while using the power cord, avoid to excessive bending; the
damage of power cable may cause electric shock and re.
• It is better to unplug the power cord after power o.
Cleaning
• Unplug the power cable rst.
• Clean the shell regularly with a damp cloth, neutral detergent can be used.
• Please use a glasses cloth or lens paper, not to scratch the lens.
• Please clean projector's vents and speakers regularly by banister brush, or
the vents will be blocked.
High temperature attention
• When in projection or just nish use, near the exhaust port will be very hot,
and may scald if touch it.
• While projection, please do not look at the lens directly, or may hurt eyes.
*Warm tips
• Do not disassemble the projector, with a risk of electric shock, also aect the
normal warranty.
• Please do not put any liquid or heavy stu on the projector.
• Leave plenty of space around and under the projector for ventilation, and do
not place it on top of or next to anything that could block the vents.
To Previous Page
Loading...