To Next PageTo Next Page
Need help?Do you have a question about the Elettro CF MIG 290 and is the answer not in the manual?
General| Input voltage | 400V |
|---|---|
| Welding current range | 30 - 290A |
| Wire diameter | 0.8 - 1.2mm |
| Welding process | MIG |
| Duty cycle | 60% @ 290A |
| Power Supply | 3-phase |
Detailed technical specifications of the welding machine, including voltage, current, and duty cycle.
Clarification of technical terms, symbols, and codes used in the specification table.
Details on the machine's safety features: block, mechanical, and thermal protection systems.
Instructions for verifying supply voltage, mounting plugs, and setting up connections.
Description of all controls, buttons, displays, and connectors on the front panel.
Identification and function of components located on the rear panel.
Steps for matching wire diameter, selecting programs, and connecting torch/earth clamp.
Procedures for connecting the torch, earth clamp, and preparing the wire feed.
Guidelines for welding carbon steel with gas protection and without gas.
Recommendations for welding stainless steel using specific gas mixtures.
Instructions for welding aluminium, including gas, wire, and torch requirements.
Identification and causes of common welding defects like porosity and shrinkage cracks.
Routine maintenance procedures for the gas nozzle, contact tip, wire liner, and feed rollers.
Schematic representation of the electrical connections and components.
Table detailing color codes for electrical wiring in different languages.
Comprehensive list of machine parts with reference numbers and descriptions.
