3
8
/
17
12
As you pull hose from the reel, the brake will keep the reel from “free-
spinning” and unrolling more hose than desired. Turn it ON when pulling
hose from reel, and OFF when reeling in—once hose is reeled in, turn the
brake ON so it’s ready for next use. If the hose is difcult to pull off or
continues unspooling after you stop pulling, use a 3⁄8" wrench to loosen
or tighten the nut on the brake 1⁄4 turn until corrected.
Brake OFF
Reeling hose in
Brake ON
Pulling hose out
1043 USING YOUR REEL
Watch how to adjust
and use the brake
eleyhosereels.com/brake
To Next Page
Loading...
