Elgato RING LIGHT Getting Started

Ring Light can be controlled using either the onboard buttons, or via Wi-Fi from a PC, Mac,
Android or iOS device.
If your PC or Mac is not equipped with Wi-Fi, use the Elgato Control Center app on your iOS or
Android device to add Ring Light.
A Wi-Fi connection is only needed for initial pairing. Once paired, you can control Ring Light via
any wired or wireless device in your network.
Switch on your Ring Light. It will take
approximately 10 seconds to boot up.
Launch Control Center and pair Ring Light by
clicking the + icon.
Use Control Center to switch Ring Light on/
off, adjust brightness, and ne-tune color
temperature.
Power on Ring Light. Push and hold
the RESET button for at least 10
seconds until the light ashes 3x.
CONTROLLING RING LIGHT
4
2
3
PC/Mac setup
1
Download and install the Elgato Control
Center software - elgato.com/download
Resetting your Ring Light
3/5 | Version 01 | December 15 2020
Compatible with:

Elgato RING LIGHT Specifications

General

Brightness	2500 lumens
Color Temperature	2900K - 7000K
Light Type	LED
Adjustable Brightness	Yes
Adjustable Color Temperature	Yes
Mounting Options	Desk Mount, Tripod Mount
Control	App
Diameter	17 inches
Power Source	AC Adapter
Compatibility	iOS, Android
Included Accessories	desk mount
Power Consumption	45 W (via power adapter)
Connectivity	Wi-Fi 2.4 GHz / 5 GHz (802.11 a/b/g/n)