Elgo LIMAX RMS - User Manual

Montageanleitung
Magnetband Montageset
(Original)
Assembly instructions
Magnetic tape installation kit
(Translation of the original assembly instructions)
Manuel de Montage
Kit d'installation de la bande magnétique
(Traduction du manuel de montage original)
LIMAX RMS LIMAX RMS90
D-100924 / Rev. 6 / 25.07.2019
799000952

Summary

ELGO LIMAX RMS Assembly Instructions

Document Overview and Safety Symbols

Document Purpose and Target Personnel

Explains the manual's function, intended users, and required qualifications.

Understanding Warning and Caution Symbols

Defines key symbols used to convey warnings, cautions, and potential hazards.

General Safety and Liability Information

General Safety Instructions and Compliance

Mandatory safety instructions, country-specific standards, and accident prevention.

Exclusion of Liability for Installation Errors

Manufacturer's disclaimer for damages from incorrect mounting or unauthorized parts.

Installation Steps Part 1

Mounting Upper Crossbeam and Tape Clamp (FIG 1)

Instructions for installing the first crossbeam and securing the tape clamp.

Tape Insertion and Initial Securing (FIG 2)

Procedure for threading the magnetic tape through the clamp and securing it.

Attaching Lower Tape Fixture (FIG 3)

Attaching the tape fixture to the bottom end of the magnetic tape.

Installation Steps Part 2

Mounting Bottom Crossbeam (FIG 5)

Installing the second crossbeam at the specified distance in the shaft pit.

Connecting Spring and Final Tape Fixture (FIG 6)

Connecting the spring to the crossbeam and attaching the tape fixture to the spring.

Elgo LIMAX RMS Specifications

General

Brand	Elgo
Model	LIMAX RMS
Category	Industrial Equipment
Language	English