If there is a previously set Tare for PLU 3. The
Tare will be deducted from the load and only
the net weight will be indicated. The “NET” sign
shows that there is a previously set Tare for the
corresponding PLU and only the net weight is
shown.
After the load is removed the Tare is shown with
a negative sign and the “T” symbol is shown in
the left part of the display.
8.1.4. Weighing an article considering Tare value (for example oranges in a pot)
The pot or other object for Tare is placed on the scale.
The display shows the weight of the pot.
Press the T key. Now the weighed load is
considered as a Tare. In the first line of the
display is shown the Net weight. It is shown by
the NET symbol in the top left part of the display.
Т
To Next Page
Loading...
