Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1
25
PRG - Parameter for work with Scanner PRG – Parameter for work with scanner
By pressing PRG the scale is going back to “WEIGHING Mode”
From each function of the Service Mode you can switch to “WEIGHING Mode” by pressing
CP .
8.4.2. Switching to “Service mode 2”
In WEIGHING Mode press PRG followed by DW . For setting the parameter are used
the keys 0 .. 9 , C ; PRG – for switching to next parameter, CP – for switching
back to WEIGHING Mode. The non-numerical fields are changed by C , (When changing
the non-numerical fields, the whole text/field is blinking).
The decimal point in the price (0/1 -
Yes/No) is changed by the C key.
PRG – Parameter LABEL – indicates the
number of the active label for dispatch to the
label printer (in mode CASH x7)
To Next Page
Loading...
