Need help?Do you have a question about the Eliet Minor 4S and is the answer not in the manual?
Emphasizes careful reading of the manual for safe and reliable use.
Instructions to copy machine identification data into provided text boxes.
Details on registering the machine online or via mail for warranty.
Explains the "For your information" symbol and its purpose.
Explains the "Caution" symbol and its purpose for safe practices.
Explains the "Warning" symbol for extreme danger and the need for alertness.
Presents a diagram identifying various parts of the machine with numbered labels.
Diagrams and labels for different engine types (Honda, Vanguard).
Explains safety stickers on the machine and their meanings.
Describes key safety features like emergency stop, cover plates, and shields.
General guidelines for safe machine operation and user responsibility.
Specific advice on proper and careful operation, including material limits.
Details the duties and qualifications required of the machine operator.
Lists recommended PPE like clothing, gloves, goggles, and ear protection.
Defines the danger zone around the machine and safety distances.
Emphasizes the importance of periodic maintenance and specific checks.
Safety guidelines for electric motor-powered machines.
A checklist of essential checks to perform before operating the machine.
Instructions and safety precautions for refuelling the machine with petrol.
Guidelines for preparing the work area before operating the machine.
Detailed steps and safety warnings for starting the engine.
Methods for stopping the engine, including emergency stop.
Covers pre-operation checks and in-use guidance.
Safety instructions and preparations before commencing work.
Guidelines and precautions for operating the machine during use.
Procedures for restarting the engine after it has stalled.
Recommendations for general maintenance and using genuine parts.
Details schedules for lubricants and special maintenance tasks.
Lists recommended lubricants for engine, hinges, and wheel axles.
Details special maintenance required for blades, especially during the break-in period.
Outlines routine checks before operation and maintenance after 20 hours.
Covers the importance and methods of cleaning the machine.
Explains why regular cleaning is crucial for machine integrity and safety.
Provides detailed steps and areas to focus on during machine cleaning.
Covers visual checks and oil level checks before operation.
Instructions for performing a visual inspection of the machine before operation.
Step-by-step guide to checking and topping up engine oil.
Explains how to clean different types of air filters.
Guidance on how to sharpen blades for optimal performance.
Instructions on how to check the V-belt tension.
Details tasks for maintenance after 20 hours of operation.
Detailed steps for changing the engine oil.
Guide to checking and replacing the spark plug, including suggested types.
Procedure for changing the air filter, referencing a previous section.
Recommendations for lubricating bearings and hinges.
Steps for adjusting the belt tension, including safety precautions.
Explains how to reverse or replace chipper blades to extend their life.
Detailed procedure for reversing the chipper blades.
Steps for replacing chipper blades with new ones.
Illustrative guide on how to turn the blow chute of the machine.
Instructions on how to clear blockages from the machine's turbine.
Steps for disassembling the blow chute for cleaning or transport.
A table listing torque specifications for various bolt sizes and strengths.
Lists potential hazards and risks associated with operating the shredder.
To Next Page
General