Eliminator Lighting Electro 196 II User Manual

Electro 196 II
SPECIFICATIONS:
Model: Electro 196 II
Lamp: L.E.D. (84 Red, 51 Green,
and 60 Blue)
Weight: 2.8lbs./ 1.3kgs.
Size: 6.14” (H) x 8.07” (W) x
6.8” (D)
Fuse: 2 Amp
Supply Voltage: 120V
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 8
Colors: Multiple Colors
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Operating Instructions:
The Electro 196 II has been tested at the factory, there is no assembly required. The unit is ready to
be plugged into a power outlet. This unit is a 8 channel DMX intelligent LED par can. It can be run as
a stand-alone unit, DMX controlled unit, or in a Master/Slave configuration. While in Stand Alone or
a Master/Slave configuration, you can run the auto mode, sound active mode, or control the colors
and intensity manually. For stand-alone mode, Master/Slave configuration, and DMX Control see
other side.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Caution! Never open unit when in use.
Always disconnect main power before
replacing fuse. Remember to always
replace with the exact same type fuse.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.

Eliminator Lighting Electro 196 II Specifications

General

Brand	Eliminator Lighting
Model	Electro 196 II
Category	Light Fixture
Language	English

Summary

Product Safety and Operation

Pre-Installation Caution

Advises users to read and understand instructions before installation or operation.

Operating Instructions Overview

Introduces the Electro 196 II as a ready-to-use 8-channel DMX intelligent LED par can, detailing its modes.

Technical Specifications

Lists key technical details including model, lamp type, weight, size, fuse, voltage, and warranty period.

Warranty Information

1 Year Limited Warranty Terms

Covers manufacturing defects, requires proof of purchase, and excludes wear and tear items.

DMX Control and Modes

Stand Alone Modes

Details manual, auto, and sound active modes using dipswitch settings for basic operation.

Master-Slave Operation

Explains linking units for synchronized operation without a controller via XLR cables and specific dipswitch settings.

Universal DMX Control

Describes using a DMX-512 controller to manage traits like color, intensity, and strobing via dipswitch addressing.

DMX Channel Traits

Lists functions for DMX channels 1-8, detailing control ranges for strobing, modes, and LED color intensity.