Do you have a question about the Elite Gourmet EKT-1203W and is the answer not in the manual?
Covers reading instructions, voltage check, user capabilities, and supervision requirements.
Details on cord condition, extension cord use, and safe placement to prevent hazards.
Focuses on stable surface operation, switching off, cooling, and avoiding hot surfaces.
Includes warnings against over-filling, moving while hot, and opening lid during boiling.
The Elite Gourmet 1.2L / 5 Cup Cool-Touch Electric Kettle, model EKT-1203W, is designed for quickly and safely boiling water for various household uses. This electric kettle combines functionality with safety features, making it a convenient appliance for daily use.
The primary function of this electric kettle is to heat water rapidly. It operates by drawing power from an electrical outlet, heating an internal element that brings the water to a boil. Once the water reaches boiling point, the kettle automatically switches off, preventing overheating and ensuring energy efficiency. The kettle is designed with a 1.2-liter (approximately 5-cup) capacity, making it suitable for preparing multiple servings of hot beverages or for use in cooking. Its cool-touch exterior is a key safety feature, designed to keep the outer surface cool to the touch even when the water inside is boiling, reducing the risk of burns. The 360° swivel base allows for easy placement and lifting of the kettle from any angle, accommodating both left and right-handed users.
Before first use, it is recommended to clean the kettle by boiling a full kettle of water twice and then discarding the water to ensure cleanliness and remove any manufacturing residues. When filling the kettle, it is important to use only cold water and ensure the water level is between the MIN and MAX marks to prevent overfilling or underfilling, which could lead to boiling dry or water ejection. The lid is opened by pressing or pulling the lid knob and should be pushed down until it snaps into place to ensure it is tightly closed during operation. The kettle is placed on its 360° swivel base, which should be on a flat, level surface. The power switch is then pressed to initiate the boiling process. Once the water boils, the kettle automatically switches off. After use, the kettle should be disconnected from the electric supply.
Safety is a paramount consideration in the design and recommended usage of this kettle. Users are advised to take caution when opening the lid after boiling, as the steam and water will be very hot. Waiting a few minutes for condensation to evaporate is recommended. The cool-touch exterior helps, but the handle should always be used for grasping the kettle. The lid should never be opened or removed while the kettle is operating to avoid the risk of burns or scalding. Keeping the lid closed allows the internal sensor to function correctly, preventing overheating and water boiling over. The kettle should not be overfilled, as this can cause boiling water to eject. It is also crucial that the kettle is only used with the provided base. The appliance should never be moved or cleaned until it has completely cooled. Automatic timers should not be used in conjunction with this product.
The kettle is equipped with a polarized plug, which is a safety feature designed to reduce the risk of electrical shock. If the plug does not fit into an electrical outlet, it should be reversed. If it still does not fit, a qualified electrician should be contacted. The plug should never be altered, nor should an extension cord be used unless it can be fully inserted and is rated appropriately for the appliance's power consumption. The power cord should not hang over the edge of a table or counter, touch hot surfaces, or be placed near hot gas or electric burners or in a heated oven. The appliance is not suitable for outdoor use and should not be carried by the power cord. It should never be left unattended during use.
Regular cleaning and maintenance are essential for the longevity and optimal performance of the Elite Gourmet electric kettle. Before cleaning, the appliance must always be disconnected from the power outlet and allowed to cool completely. The base and power cord should never be immersed in water or allowed to get wet.
Mineral deposits and lime scale can accumulate over time, especially when using tap water, and may cause discoloration inside the kettle. While natural and harmless, these deposits can affect the taste of beverages. To remove mineral deposits and lime scale, a liquid de-scaler or a solution of white vinegar and water can be used. For a vinegar solution, fill the kettle with 3 cups of white vinegar and the remainder with water, then let it stand overnight without boiling. After standing, the solution should be emptied, and any remaining stains inside the spout can be removed with a damp cloth. The kettle should then be filled with water, brought to a boil, and the water discarded. This process can be repeated if necessary. Using filtered water is recommended to reduce lime scale buildup. The heating element is designed to help reduce scale buildup, and the filter helps prevent particles from pouring into beverages.
For cleaning the exterior housing, a damp cloth or a mild cleaner can be used. Harsh chemical cleansers, steel wool, wooden, or abrasive cleaners should never be used on the outside of the kettle, as they can damage the finish. The swivel base and exterior of the kettle must never become wet. The kettle body used must always match the 360° swivel base.
| Type | Electric Kettle |
|---|---|
| Material | Stainless Steel |
| Voltage | 120 volts |
| Cord Length | 30 inches |
| Color | White |
| Features | Automatic Shut-Off, Boil-Dry Protection |
| Capacity | 1.2 Liters / 40.57 Ounces |
Loading...