12/9/2016-DR www.elitescreens.com 1
RF Remote Synchronization Instructions
(For Electric Floor Rising /Floor Rising Tensioned Projection Screens only)
1.
Connect the power cord and supply power to the screen
2.
Switch the red power button to the
ON
position.
Manual Operation Switch
: The left side of the screen's housing includes a UP/STOP/DOWN toggle switch
to raise, stop, and lower the screen.
3.
Switch the button to the “
UP
” position and allow the screen to raise some distance until the control
box behind the screen is visible.
To Next Page
Need help?
General
