Operating Instructions
Raise Shade: Press and hold button for 1-2 seconds.
Lower Shade: Press and hold button for 1-2 seconds.
Stop Shade: Press button while shade is in motion.
Tilt Shade (High-Lite® & Sheer Horizontal Shades only):
Tap or buttons.
User & Programming Guide
5 Channel Handheld Remote
1
3
4
5
Front View Rear View
C
L
Transmitter
Model: BF-305W
Freq: 433.92MHz
Battery: CR2430
Pg. 1
2
We thank you for your purchase of E-Motion™ automated shades from Elite Window Fashions™. Your shades have been
custom programmed by our factory to automatically stop at the top and bottom of your windows. Please consult this
guide for proper shade operation and programming.
Operating Instructions
Raise Shade: Press and hold button for 1-2 seconds.
Lower Shade: Press and hold button for 1-2 seconds.
Stop Shade: Press button while shade is in motion.
Tilt Shade (High-Lite® & Sheer Horizontal Shades only):
Press and release or button.
Change Channels: Press or arrows to change
channels. The numbered LED lights at the top of the
remote indicate the current channel. When all LED lights
are on, the remote will operate all shades.
Channel LED Lights
Up
Stop /
Intermediate Position
Down
Channels Up / Down
5 Channel Wall Remote
(cover plate removed)
Channel
LED Lights
Up
Stop /
Int. Position
Down
Limit
Button
Limit
Button
Channel Up / Down
Intermediate Position: Press button when shade is
stopped (must be set by user, see pg. 2 for setup).
Intermediate Position: Press button when shade is
stopped (must be set by user, see pg. 2 for setup).
Change Channels:
Press or arrows to change
channels. The numbered LED lights at the top of the
remote indicate the current channel. When all LED lights
are on, the remote will operate all shades.
C
L
To Next Page
Need help?
General