3. Time setting
A. Available no matter the machine is on or off.
B. Press key to set time，when the clock on the screen is flashing, press again to set
hour. Use or to adjust hour. Before the flashing stops, press to set minute.
Use or to adjust. After adjusting，press and water temperature will be
displayed. 30 seconds later，the controller display will be back to the normal mode.
4. Timer on and off
A. Press set timer on. When the indicator light is on and the time is flashing, press again to set
hour. Use or to adjust. Before the flashing stops, press to set minute.
B. Use or to adjust. After adjusting, press and water temperature will been seen.
30 seconds later, the controller display will be back to the normal mode.
C. Press to set timer off. When the indicator light is on and the time is flashing, press
again to set hour. Use or to adjust before flashing stop, press to set minute.
Use or to adjust. After adjusting, press and water temperature will been seen.
30 seconds later, the controller display will be back to the normal mode.
5. Cancel timer on and off
Press or to cancel timer on and off. When the number is flashing, press when
timer indicator light is off and LED shows water temperature, the timer on and off is canceled.
30 seconds later, the controller display will be back to the normal mode.
To Next Page
Loading...