Elite TH0471 Programmer
with Temperature Control
6
USING ADVANCE
This function is only applicable when your programmer is set
with at least 1 ON/OFF period.
The normal switching times can be temporarily overridden by
pushing the button marked ADVANCE.
This switches ON to OFF or OFF to ON as required, but the
normal programme switching times will not be permanently
affected.
Cancel ADVANCE by pushing the ADVANCE button again.
An “ADV” icon will be shown on the display pointing to the
appropriate function, either or
USING +1…3HR (ALSO KNOWN AS “BOOST”)
The button marked +1--3HR will bring the unit on one hour to
three hours in the OFF mode, or extend by one hour to three
hours while ON.
To cancel, just press the button again.
When +1--3HR is in operation a countdown clock will appear.
The normal display and the countdown clock will appear on the
display alternately.
When the +1--3HR brings the unit on one hour to three hours
while in OFF mode, the clock will count down immediately.
When the +1--3HR extends operation by one hour to three
hours while in ON mode, the clock will count down after the
programmed ON is finished.
Please note the +1--3HR will also work when the unit is in any
OFF position.
To Next Page
Loading...