Elitech EW4 User Manual

WALL PLATE
L=1000mm(×1)
A
EXTENSION TUBE
L=860mm(×1)
B
PLATFORM BASE(×1)
D
PLASTIC COVER (×1)
C
ADJUSTING PLATE
140mm(×4)
F
ADJUSTING PLATE
185mm(×3)
E
PLASTIC CAP
38(×1)
G
NUT 5/16"(×4)
4
WASHER
5/16"(×4)
5
SPRING WASHER
5/16"(×4)
6
SCREW CAP
5/16"*L3/4"
WITH 2 WASHERS(×2)
3
BRAKE SCREW
3/8"*L1/2"(×1)
1
SCREW
5/16"*L14mm(×4)
2
SCREW
M3*L=38mm(×4)
13
SCREW
M4*L=35mm(×4)
14
SCREW
M5*L=35mm(×4)
15
SCREW
M6*L=35mm(×4)
16
PLASTIC WASHER(×4)
18
ALUMINUM PIPE
9.5*L=20mm(×4)
17
WASHER
5* 5/8"(×4)
19
WALL
ANCHORS(×6)
8
WASHERS
8* 18(×10)
7
WALL SCREW
5/16"*L2 1/2"(×6)
9
ALLEN WRENCH
NO.5(×1)
11
ALLEN WRENCH
NO.4(×1)
10
ALLEN WRENCH
NO.6(×1)
12
FOR PROJECETOR
EW4
Component list
Elitech International USA
www.elitechusa.com

Elitech EW4 Specifications

General

Brand	Elitech
Model	EW4
Category	Projector Accessories
Language	English

Summary

Component List

Assembly Steps

Step 1: Install Wall Plate

Install the wall plate to the wall using anchors, washers, and wall screws.

Step 2: Attach Extension Tube

Connect the extension tube to the wall plate tube and tighten with a screw cap.

Step 3: Mount Adjusting Plate to Projector

Attach the adjusting plate (E or F) to the projector using the correct size screws.

Step 4: Install Platform Base

Install the platform base onto the adjusting plate, ensuring screws face upwards.

Step 5: Connect Platform to Extension Tube

Attach the platform base to the extension tube using the brake screw.

Step 6: Route Cables

Route cables through the perforates holes on the extension tube.