Elitech RC-4 User Manual

Skip to content
Manuals+
User Manuals Simplified.
Elitech Temperature Data Logger User Guide
Home » Elitech » Elitech Temperature Data Logger User Guide
RC-4/RC-4HA/RC-4HC
Quick Start Guide.
Contents [ hide
1 Install Battery
2 Install Software
3 Start/Stop Logger
4 Configure Software
5 Troubleshooting
6 File Downloads
7 References
8 Related Manuals
Install Battery
1. Use a proper tool (such as a coin) to loosen the battery cover.

Elitech RC-4 Specifications

General

Temperature Accuracy	±0.5°C
Temperature Resolution	0.1°C
Sensor	Internal NTC thermistor
Battery Life	Up to 1 year
Protection Grade	IP65
Temperature Measuring Range	-30°C to +60°C
Memory Capacity	16, 000 readings
Data Logging Capacity	16, 000 data points
Display	LCD
Communication	USB
Recording Interval	1 second to 24 hours

Summary

Install Battery

Install Software

Start/Stop Logger

Configure Software

Troubleshooting

Intermittent Data Logging

Verify battery installation and ensure it is correctly fitted for intermittent data logging.

Logger Not Logging Post-Startup

Check if the start delay is enabled in the software configuration for logging to commence.

Logger Fails to Stop

Review parameter settings for button customization, as default configuration disables this.

File Downloads

References

Related Manuals