EasyManuals Logo

Elk Products ELK-150RT User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Siren & Stainless Steel Enclosure
ELK-150RT
Features
Specifications
The ELK-150RT is a self-contained Siren in a
tampered “No Rust” stainless steel enclosure. It
features two sealed reed tamper switches, one on
the Back plate and one on the Front Cover. The
switches are normally closed and pre-wired in
series. The ELK-150RT can produce two distinct
sounds from a single input trigger. The stainless
steel exterior reflects the color of the mounting
surface allowing the ELK-150RT to blend easily
with any residential or commercial building.
Also available is the ELK-45 which is the self
contained siren without the stainless enclosure; the
ELK-SL1 Strobe Light which can be added to the
enclosure, and the ELK-1RT which is a 30 watt
speaker in the stainless enclosure.
The ComboTrigger
option allows controls which
have a single alarm output and pulsing option to
activate both the burglar and fire alarm sounds.
The MilliMiser
option allows the already low
current draw of the ELK-150RT to be reduced
even lower. This is ideal for controls with limited
alarm output power.
Installer Friendly - Easy to Mount.
Sealed Reed Tamper Switches at single bolt
closure and at rear of cabinet.
No Rust - No Mess - Exterior / Interior use.
Compact - Less Noticeable.
Loud - Rivals Sound of Larger Speakers.
Heavy Duty 1.8 lb Magnet.
MilliMiser
Lowers Current Draw.
ComboTrigger
For Single Outputs.
Stainless Mounting Hardware Included.
Lifetime Limited Warranty.
ELK
PRODUCTS, INC.
PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax 828-397-4415 • www.elkproducts.com • info@elkproducts.com
ELK-150RT
with optional
ELK-SL1C
Clear Strobe
Tamper-Proof Cover Self-Contained
Siren & Speaker
Hardware Pak
Back Plate w/
(2) Tamper
Switches
Features and Specifications subject to change without notice.
Cut-away
view
Components of
ELK-150 RT
Operating Voltage: 6 to 14 Volts D.C.
Current Draw: 1.2 Amps, (700 mA on MilliMiser
)
Sound Level: 118 dB @ 1 meter, 14 Volts DC.
Enclosure: #304 Stainless Steel.
Size: 5"H x 5"W x 4"D.
05/02

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Elk Products ELK-150RT and is the answer not in the manual?

Elk Products ELK-150RT Specifications

General IconGeneral
BrandElk Products
ModelELK-150RT
CategorySecurity System
LanguageEnglish