Elk ELK-M1KP2 User Manual

Page 1
LCD Keypads ELK-M1KP2 & ELK-M1KP3
FEATURES
! Blue/white Backlighted Hi-Contrast LCD Display
! Four (4) Programmable Function Keys
! Unique Menu Navigation/Direction Keys
! Operates from the M1/EZ8 'RS-485' Data Bus
! Built-in Piezo Sounder with adjustable pitch
! Accepts "External" 26 bit Weigand Prox Reader (Optional)
! Input for 1 Supervised Zone
! One Programmable "Switched Positive" Voltage Output
! Exit, Stay, Chime, and Bypass Keys
! Surface Mounts with 1 or 2 gang electrical box (M1KP2 only)
! Optional Flush Mount Kit "ELK-M1BBK2" (M1KP2 only)
! Hinged Door over Keys (M1KP3 only)
SPECIFICATIONS
! Connection: 6 Pin Plug-in "Flying Lead" Connector (Included)
! Color: White
! Operating Voltage: 13.8 VDC
! Current Draw: ~30 mA Idle (low back light level, sounder silent)
~85 mA Fully Active (max. back light)
! M1KP2 Size: 4.658" W x 5.5" H x .95" D (.375" D if recessed)
M1KP3 Size: 3.97" W x 5.425" H x 1.19" D
Features and Specifications subject to change without notice.
ACCESSORIES
! ELK-W039A - 2 Wire Cable Assembly for connecting an
External Prox Reader such as the ELK-106055
! ELK-M1BBK2 - Back Box for recess mountiing M1KP2 ONLY!
890-367 01/18/07
APPLICATION
The ELK-M1KP2 and M1KP3 are addressable LCD Keypads for the M1
and M1EZ8 Cross Platform Controls. They feature 32 character blue/
white backlighted displays, blue lighted keys, and 4 programmable
function keys. The M1KP2 can be surface mounted with or without a
1 or 2 gang electrical box and may be 'flush' mounted using a separately
purchased back box kit (ELK-M1BBK2). The M1KP3 is for surface
mount only without an electrical box. It features a hinged door over the
keys. Both units accept the Elk-106055 External Proximity Reader
allowing cards or fobs to be used for arming, disarming, or limited door
strike control. Other brands of 26 bit readers may also be compatible.
PO Box 100 • Hildebran, NC 28637 USA • 828-397-4200 Voice • 828-397-4415 Fax
http://www.elkproducts.com • email: info@elkproducts.com
Side profile of ELK-M1KP2 surface mounted vs.
flush mounted with ELK-M1BBK2 Kit.
ELK-M1KP3
w/door open
ELK-M1KP2

Elk ELK-M1KP2 Specifications

General

Compatibility	ELK-M1 Control
Backlight	Yes
Keys	16
Power Supply	12V DC
Mounting	Surface mount
Type	Keypad
Buzzer	Yes
Communication	RS-485
Operating Temperature	0°C to 50°C
Display	2 x 16 LCD

Summary

ELK-M1KP2/M1KP3 LCD Keypad Overview & Features

Application Details

Core applications and system compatibility for the ELK-M1KP2 and ELK-M1KP3 keypads.

Product Key Features

Highlights essential features like the backlit display, programmable keys, and reader support.

Technical Specifications

Details connection types, voltage, current draw, and physical dimensions of the keypads.

Available Accessories

Lists optional accessories such as cable assemblies and mounting back boxes for the keypads.

Keypad Installation & Data Bus Configuration

Setting Address & Enrolling Devices

Guides on setting device addresses and enrolling keypads/expanders into the M1/EZ8 system.

Data Bus Termination Best Practices

Stresses the critical role of proper data bus termination for system reliability and performance.

Data Bus Device Wiring Diagram

Illustrates daisy chain connections for data bus devices using home run cables.

Keypad Wiring & Proximate Access Control Setup

Keypad Wiring Diagrams

Provides hookup diagrams for keypads and explains connecting optional external proximity readers.

Enrolling Prox Cards & Fobs

Details the procedure for enrolling proximity cards and fobs for access control functions.