Elka ES 25 - User Manual

Installation and operating instructions
Barriers
ES 25 – ES 25 HS - ES 30 – ES 40
Contents page
1 Technical Data 2
2 Dimensions 2
3 Installation 3
4 Logic card MO 62 4
4.1 Operating mode 4
4.2 Programming the MO 62 5
5 External electrical connections 5
6 Fault finding 7
7 Layout in the barrier 9
8 Extra equipment 10
8.1 Folding boom 10
8.2 Swinging support 12
9 Radio remote control 13
10 Induction loop examples 14
11 General notes to safety 16

Summary

Technical Data

Dimensions and Specifications

Installation Guide

Logic Card MO 62 Configuration

Operating Mode Settings

Configure the barrier's operational behavior and response modes.

Controller Programming Procedures

Learn how to program specific functions and timings for the controller.

External Electrical Connections

Troubleshooting Faults

Barrier Fails to Open

Diagnose and resolve issues when the barrier does not respond to open commands.

Barrier Fails to Close

Troubleshoot problems when the barrier does not respond to close commands.

Barrier Layout and Components

Optional Accessories

Folding Boom Installation

Step-by-step guide for mounting and adjusting the folding boom.

Swinging Pogo Stick Support Setup

Instructions for installing the swinging pogo stick support for ES 40.

Radio Remote Control Code Setting

Loop Detector Configuration Examples

General Safety Guidelines

Elka ES 25 Specifications

General

Brand	Elka
Model	ES 25
Category	Other
Language	English