Need help?Do you have a question about the ELKHART BRASS Sidewinder RF 8494 and is the answer not in the manual?
General| Model | Sidewinder RF 8494 |
|---|---|
| Material | Aluminum |
| Inlet | 2.5 inch |
| Type | Monitor |
| Style | Remote Control |
Describes the Sidewinder RF Monitor for off-road/wild land fire fighting.
Details the monitor control circuit with PIC chip design and wireless control.
Explains the W.E.T. wireless radio link for sending commands from transmitters.
Covers three constant flow electric nozzles with varying GPM capacities.
Provides remote on-off control for water supply to the 8494 Sidewinder RF.
Nozzle designed for aircraft deicing with specific fluid resistance.
Lists input power, dimensions, weight, temp range, and FCC ID.
Lists input power, dimensions, temp range, and FCC ID.
Details power requirements, dimensions, control current, and temp range.
Instructions for mounting the Sidewinder RF Monitor, ensuring clear rotation envelopes.
Details power connection, fuse placement, and mounting the receiver/control module.
Instructions for mounting the joystick control box, including drilling and wiring.
Steps for installing the optional water valve kit, routing cables, and connections.
Explains how RF transmitters control the monitor using security codes.
Procedure to program left/right rotation limits using the red programming button and status LED.
How to control the monitor, nozzle, and valve using joystick or handheld transmitters.
Explains the oscillation function for continuous exposure protection.
Procedures for manually actuating the monitor, nozzle, and valve during power failure.
Routine inspections of the monitor, valve, and nozzle after operation.
Explains the meaning of various LED indicators on the circuit board.
Information on battery type and how to replace batteries in the handheld transmitter.
To Next Page
