Need help?Do you have a question about the Elkron CR200 and is the answer not in the manual?
General| Brand | Elkron |
|---|---|
| Model | CR200 |
| Category | Security System |
| Language | English |
Describes the physical components of the CR200 alarm control panel.
Details the AC adapter and battery for the control panel's operation.
Instructions for linking the alarm system to a phone line.
Guidance on physical installation and mounting of the control panel.
Explains the four authorization levels: PIN, Master, Installer, and Guardian codes.
Initial steps for setting up and operating the CR200 alarm system.
Configures how the system reports events to a central station.
Manages the installer access code for system programming.
Sets up central monitoring station details like phone and account numbers.
Configures device behavior, DC option, duress, and latch features.
Manages system devices: adding, editing, and removing.
Configures emergency phone numbers and voice messages for reporting.
Manages user PIN, temporary, duress, and master codes.
Sets entry/exit delays, alarm length, siren delay, and supervision.
Configures entry/exit sounds, door chime, warning beeps, and ring tone.
System settings for final door, remote controller, tamper, siren, interference.
Sets the current time and date for system operations.
Manages system devices, including adding, editing, and removing them.
Verifies sensor and alarm functionality through system testing.
Accesses the user menu for arming/disarming the system.
Instructions for arming the system in Away mode.
Procedure to arm the system despite existing fault conditions.
Steps to disarm the alarm system.
Instructions for arming the system in Home mode for partial security.
How to arm the system while bypassing specific sensors.
Details alarm responses based on alarm type and system mode.
Procedures for silencing alarms and clearing the display.
Accessing and viewing the system's event log.
Manages system configuration via remote or local upload/download.
Features to reduce false alarms, such as dual-ply entry warning.
Detects, displays, and responds to system faults.
Details auto-dialing, call acknowledgment, and redialing procedures.
Manages listen-in communication with the central station.
Controls the alarm system remotely via telephone.
Specific commands for remote control functions.
Resets the CR200 control panel to factory default settings.
Details the Contact-ID protocol and message structure for central station communication.
To Next Page
