EasyManua.ls Logo

ELLAI MT-25005B - User Manual

ELLAI MT-25005B
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MODEL #
Smart Toilet
Español p.
1
Español p.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-804-5504, 8:30 a.m. - 5 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
MT-25005B
Question and Answer IconNeed help?

Do you have a question about the ELLAI MT-25005B and is the answer not in the manual?

Summary

Parts Diagram

Side Buttons On Toilet

Labels for buttons located on the side of the toilet unit.

Package Contents Overview

Lists the main components included in the product package.

Hardware Contents

Included Hardware Components

Lists all hardware components provided with the toilet for installation.

Safety Precautions

Essential Warnings and Cautions

Critical safety guidelines, warnings, and cautions for user protection.

Preparation

Assembly Preparation Steps

Steps and checks required before starting product assembly.

Before Installation

Installation Environment and Valve Setup

Checks for installation site and initial water valve setup.

Precautions for Installation and Use

Installation and Usage Guidelines

Important guidelines to follow during installation and initial use.

Toilet Installation

Seat Removal and Battery Installation

Instructions for lifting the toilet seat and installing the battery.

Toilet Installation

Wax Ring and Floor Bolt Installation

Guidance on placing the wax ring and securing the toilet base.

Toilet Installation

Reconnect Hoses and Seat

Instructions for reconnecting water hoses and the toilet seat.

Water Supply Installation

Connecting Water and Checking Leaks

How to connect the water inlet hose and verify for leaks.

Remote Controller Installation

Mounting the Remote Bracket

Steps for attaching the remote control holder to the wall.

Turn On Water

Water Supply Check

Procedures for turning on water and checking for leaks.

Link the Power

Power Connection and Safety Test

How to connect power and test the safety features.

Check Toilet Buttons

Side Button Functionality Check

Verifying the power indicator on the toilet's side buttons.

Remote Control - Basic Functions

Activating Washing Functions

How to activate washing using the sit-down sensor and basic controls.

Remote Control - Basic Functions

Air and Drying Features

Operation of warm air temp, dryer position, and nozzle cleaning.

Special Wash Functions

Using Lady care and Strong wash modes.

Remote Control - Basic Functions

Water and Seat Temperature Control

Adjusting water and seat temperatures across multiple levels.

Special Wash and Mode Functions

Using Deodorizer, Child wash, One solution, and mode distinctions.

Remote Control - Basic Functions

Flush and Automatic Functions

Operation of flush, auto-flush, and auto-open seat features.

Side Buttons - Basic Functions

Basic Side Button Operations

Using main functions directly from the toilet side buttons.

Buzzer Sounds From Toilet

Buzzer Notification System

Understanding the meaning of different buzzer sounds.

Troubleshooting

Common Problems and Solutions

Troubleshooting common issues like no spray, no heat, or water leakage.

Service & Clean

General Maintenance

Routine cleaning and upkeep procedures for the toilet.

Service & Clean

Spray Tip Cleaning

Instructions for cleaning the spray nozzles.

Inlet Water Strainer Cleaning

Strainer Cleaning Procedure

Steps to clean the water inlet strainer to maintain water pressure.

Service & Clean

Strainer Re-installation

How to reinstall the water inlet strainer after cleaning.

Replace the Remote Control Battery

Remote Battery Replacement and Pairing

Guide for replacing remote batteries and re-pairing the remote.

Replace the Back-Up Battery

Back-up Battery Replacement Steps

Instructions for replacing the toilet's internal back-up battery.

Warranty

Warranty Terms and Conditions

Details on warranty coverage and conditions for voiding it.

Specifications

Electrical and Flushing Specifications

Details on voltage, power, flushing rates, and safety devices.

Seat, Drying, and Deodorization Specs

Specifications for seat heating, drying, and deodorization functions.

Control, Dimensions, and Consumption

Information on remote control, product dimensions, and water consumption.

Overview

This document describes the ELLAI Smart Toilet, Model # MT-25005B, providing detailed information on its functions, installation, usage, and maintenance.

Function Description

The Smart Toilet offers a comprehensive range of features for personal hygiene and convenience. Key functions include:

  • Washing:
    • Rear Wash: Provides a posterior wash.
    • Moving Wash: The rear wash spray tip moves back and forth for a more thorough wash.
    • Front Wash: A gentle wash specifically designed for women.
    • Moving Front Wash: The front wash spray tip moves back and forth for gentle washing.
    • Spray Tip Position Adjustment: Allows adjustment of the spray tip position (5 settings).
    • Cleansing Water Pressure Adjustable: Enables adjustment of cleansing water pressure (4 settings).
  • Temperature Control:
    • Temperature Adjustment: May adjust seat and cleansing water temperature (4 settings for both, ranging from ambient to 102.2°F).
    • Warm Air Temperature Adjustment: Adjusts the temperature of the warm air used for drying (4 settings, ranging from 95°F to 129.2°F).
  • Drying:
    • Dry With Warm Air: Blows warm air to dry washed areas.
    • Dry While Moving: The air outlet moves back and forth for quicker drying.
    • Warm Air Outlet Position Adjustment: Adjusts the air outlet position.
  • Convenience & Automation:
    • Sit-Down Sensing: All functions are ready once the user sits on the seat.
    • Deodorization: Removes unpleasant odors.
    • Power: Turns the toilet power supply on or off.
    • Eco Mode: Conserves energy and is environment-friendly.
    • Night Lamp: Indicates the toilet location in low light conditions.
    • Clean Spray Tips: Spray tips self-clean with water before each wash.
    • Seat Soft Closing: The toilet seat closes slowly due to a damper.
    • Automatic Flush: Automatically flushes the bowl when the user leaves the seat.
    • Smart Remote: Allows setting and control of the toilet via a remote.
    • Flush In Case Of Power Outage: Side buttons can be pressed to flush the bowl during a power outage (requires back-up batteries).
    • Automatic Lid: The lid automatically opens when someone approaches and closes when leaving.
    • UV Sterilization: Automatically sterilizes the toilet seat for 3 minutes after 12 seconds of non-use, and again every 4 hours.
  • Specialized Modes:
    • Lady Care: A specialized mode with default settings for nozzle extension, highest water temperature (102.2°F), and 2nd level water pressure.
    • Strong Wash: A powerful washing mode with the nozzle extended and highest water pressure.
    • Child Wash: A mode with the nozzle at the front (5th level), low water pressure (1st level), and mid-grade water temperature (96.8°F).
    • One Solution: A pre-programmed session consisting of a rear wash (40 seconds), oscillate wash (20 seconds), and warm air dryer (20 seconds).

Important Technical Specifications

  • Rated Voltage: AC 120V, 50-60Hz
  • Maximum Power: 1280W (at inlet water temperature 41°F, and outlet water temperature and flow set at the top level)
  • Rated Power: 1200W (at inlet water temperature 59°F±32.9°F)
  • Power Cord Length: 4-ft 11.05-in
  • Water Pressure Range: 0.1 MPa (dynamic) – 0.75MPa (static) (flow no less than 18L/min)
  • Water Heating Power: 1600W
  • Drying Power Consumption: 200W
  • Seat Heating Power Consumption: 40W
  • Deodorization Power Consumption: 3W
  • Product Dimension (LWH): 26.77×16.54×20.31 (in)
  • Product Weight: 88LB
  • Average Water Consumption: 4.0L
  • Safety Devices: Temperature sensing and control system, burn-out prevention device, over-temperature protection device, water and electricity separation system, recoverable temperature switch/fuse.

Usage Features

  • Remote Control: The primary method of operation, offering control over all functions. The remote includes buttons for rear wash, dryer/deodorizer, strong/lady care, front/strong wash, water temp, night light, front wash, stop/power off, weak/child wash, back/one solution, seat temp, and nozzle clean.
  • Side Buttons: Located on the toilet, these buttons provide essential functions for use when the remote is not available. They include Flush/Power On/Off, Dryer, Front Wash, and Rear Wash. These are intended for occasional use.
  • Sit-Down Sensor: Activates washing functions only when skin contact is made with the seat.
  • Automatic Features: Automatic lid opening/closing, automatic flush, and automatic deodorization enhance user convenience.
  • Adjustable Settings: Users can customize water pressure, spray tip position, and water/air/seat temperatures to their preference.
  • Code Matching: The remote control needs to be paired with the toilet for proper functionality. Instructions are provided for this process.
  • Power Outage Flush: A manual flush option is available via side buttons in case of power failure, provided back-up batteries are installed.

Maintenance Features

  • Regular Cleaning: The toilet housing and seat should be cleaned with a soft wet cloth and a neutral detergent. Prompt cleaning of dirt on the seat is recommended.
  • Spray Tip Cleaning: The 'Nozzle Clean' button activates a self-cleaning mode for the spray tips, which can also be manually cleaned with a non-abrasive brush.
  • Inlet Water Strainer Cleaning: Instructions are provided for cleaning the inlet water strainer to maintain optimal flush water pressure. This involves turning off the water supply, removing the strainer cover, cleaning the strainer with tap water and a toothbrush (no detergent), and then re-installing.
  • Battery Replacement:
    • Remote Control Battery: Requires 2 AAA alkaline batteries. Instructions detail correct placement of positive and negative poles.
    • Back-Up Battery (9V - Seat Cover Battery): Essential for power outage flush. Requires a 9V alkaline battery. Instructions detail how to access and replace this battery.
  • Troubleshooting Guide: A comprehensive table lists common problems, possible causes, and solutions, such as issues with power, water spray, water/seat temperature, lid looseness, and remote/button functionality.
  • Pre-Maintenance Steps: Always unplug the power source before performing maintenance.
  • Water Drainage: For extended periods of non-service, drain water from the inlet hose and turn off the distribution box power supply.

ELLAI MT-25005B Specifications

General IconGeneral
BrandELLAI
ModelMT-25005B
CategoryToilets
LanguageEnglish