Ellipse ECV137W - User Manual

Questions and Answers

D
Dr. George CarpenterAug 16, 2025
What to do if my Ellipse ECV137W Freezer temperature is too warm?
- M
  Mrs. Cynthia SmithAug 17, 2025
  If the temperature inside your Ellipse Freezer is too warm, try these steps: * If the temperature control is set too warm, turn it to a cooler setting and allow several hours for the temperature to stabilize. * Avoid keeping the door open too long or opening it too frequently. * Ensure the door is closed completely and that the door gasket seals properly. * Consider if a large amount of warm or hot food has been stored recently. * If the freezer has recently been disconnected, allow four hours for it to cool down completely.
S
Samuel SchmidtAug 19, 2025
Why does my Ellipse ECV137W Freezer compressor turn on and off frequently?
- C
  courtneyjonesAug 19, 2025
  Your Ellipse Freezer's compressor might be turning on and off frequently due to several reasons: * The room temperature may be hotter than normal. * A large amount of food has been added to the freezer. * The door is opened too often or is not closed completely. * The temperature control is not set correctly. * The door gasket does not seal properly. * The freezer does not have the correct clearances. * The freezer has recently been disconnected; allow four hours to cool down completely.
K
katherine67Aug 22, 2025
How to fix Ellipse Freezer that does not operate?
- D
  Devon HoltAug 22, 2025
  If your Ellipse Freezer does not operate, check the following: * Ensure the freezer is plugged in. * Check the circuit breaker or fuse. A tripped breaker or blown fuse could be the cause. * Make sure the freezer temperature control is not set at "0/OFF".
C
charles62Aug 25, 2025
What does code E9 mean on my Ellipse ECV137W?
- K
  Kimberly NormanAug 26, 2025
  Code E9 on your Ellipse Freezer indicates a high temperature inside the freezer.
L
Lori EvansAug 27, 2025
What does code E6 mean on my Ellipse ECV137W Freezer?
- C
  Corey NelsonAug 28, 2025
  Code E6 on your Ellipse Freezer indicates a communication failure.
D
Diane RamirezAug 30, 2025
What does code E7 mean on my Ellipse Freezer?
- Y
  Yvonne KleinAug 30, 2025
  Code E7 on your Ellipse Freezer indicates an ambient temperature sensor failure.
B
Becky BoothSep 2, 2025
What does code E2 mean on my Ellipse ECV137W?
- W
  Wanda TerrellSep 2, 2025
  Code E2 on your Ellipse Freezer indicates a freezer temperature sensor failure.
K
Keith WagnerSep 4, 2025
What does code E5 mean on my Ellipse Freezer?
- D
  Dr. Diana MullinsSep 5, 2025
  Code E5 on your Ellipse Freezer indicates a freezer defrosting sensor failure.
C
Christina MillerSep 7, 2025
What to do if my Ellipse ECV137W Freezer temperature is too cold?
- E
  Erica SharpSep 7, 2025
  If the temperature inside your Ellipse Freezer is too cold, turn the control to a warmer setting and allow several hours for the temperature to stabilize.
L
Luis FloydSep 12, 2025
Why does my Ellipse Freezer make popping or cracking sounds?
- M
  Melissa PerrySep 12, 2025
  The popping or cracking sound you hear when the compressor comes on in your Ellipse Freezer is normal. It's caused by the expansion and contraction of metal parts, similar to hot water pipes. The sound should level off or disappear as the freezer continues to run.