EasyManua.ls Logo

Elmo Rietschle V-VCB 20 User Manual

Elmo Rietschle V-VCB 20
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
V
V-Serie
V-Series
Drehschieber
Rotary Vane
Edition: 1.12.2009 · BA 159-EN
Original Operating Instructions
V-VCB
V-VCB 20 | 25
Question and Answer IconNeed help?

Do you have a question about the Elmo Rietschle V-VCB 20 and is the answer not in the manual?

Elmo Rietschle V-VCB 20 Specifications

General IconGeneral
BrandElmo Rietschle
ModelV-VCB 20
CategoryWater Pump
LanguageEnglish

Summary

2 Safety

2.1 Warning instruction markings

Details the different warning levels (DANGER, WARNING, CAUTION, NOTICE) and their consequences if not obeyed.

2.2 General

Provides general safety instructions for installation, commissioning, maintenance, and inspection work.

2.3 Designated use

Specifies the intended applications and operating conditions for the vacuum pump.

2.4 Unacceptable operating modes

Lists prohibited operating modes and media, such as explosive or aggressive substances.

2.5 Personal qualifications and training

Emphasizes the need for qualified personnel and proper training for operating and maintaining the machine.

2.6 Safety-conscious work

Outlines additional safety regulations and accident prevention measures to be observed.

2.7 Safety notes for the operator

Provides specific safety precautions for the operator, including guarding hot parts and electrical risks.

2.8 Safety instructions for installing, commissioning and maintenance

Details safety procedures for installation, commissioning, and maintenance activities.

3 Transport, storage and disposal

3.1.2 Lifting and transporting

Provides guidance and warnings on safe lifting and transporting techniques using lifting devices or cranes.

4 Set up and operation

5 Installation

5.5 Connecting the motor

Provides instructions for safely connecting the motor to the power supply, including electrical safety warnings.

7 Maintenance and repair

8 Malfunctions: Causes and elimination

Machine is switched off by the motor protection switch

Troubleshooting steps for when the motor protection switch trips, covering electrical and operational causes.

Pumping capacity is insufficient

Identifies causes and solutions for reduced pumping capacity, such as pipe restrictions or dirty filters.

Final pressure (max. vacuum) is not reached

Troubleshooting for failure to achieve maximum vacuum, checking for leaks and oil viscosity.

Machine gets too hot

Addresses overheating issues, considering ambient temperature, cooling air supply, and oil viscosity.

Exhaust air contains visible oil mist

Diagnoses causes of oil mist in exhaust air, including separator element issues and back pressure.

9 Technical Data

Related product manuals