Notice
This guide is delivered subject to the following conditions and restrictions:
• This guide contains proprietary information belonging to Elmo Motion Control Ltd.
Such information is supplied solely for the purpose of assisting users of the Gold
Maestro servo drive in its installation.
• The text and graphics included in this manual are for the purpose of illustration and
reference only. The specifications on which they are based are subject to change
without notice.
• Information in this document is subject to change without notice.
Elmo Motion Control and the Elmo Motion Control logo are
registered trademarks of Elmo Motion Control Ltd.
EtherCAT Conformance Tested. EtherCAT® is a registered
trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
Document no. MAN-GOLD-MAESTRO-IG (Ver. 1.300)
Copyright 2012
Elmo Motion Control Ltd.
All rights reserved.
Catalog Number
GOLD-MAESTRO02 20 to 196 VDC power supply
Revision History
Version Date Details
Ver. 1.0 6
th
May 2010 Initial Release
Ver. 1.1 13
th
May 2010 Minor updates
Ver. 1.2 July 2010 Updates to Chapter 3 and Chapter 4 (Appendix)
Ver. 1.300 Oct. 2012 Updates to Chapter 3 and minor updates in other
chapters.
To Next Page
Loading...