ELMOT 024 - Use; Using the Adjustable Guide Comb

15
USE
ATTENTION! Do not use the appliance if the blades of the heads 3 and
4 (g. A) are damaged or if the blade block is not working correctly.
Do not use the appliance on wet hair.
The Elmot-024 rechargeable Trimmer is a multifunctional product designed for finish-
ing and styling, with two different heads and an adjustable guide comb.
TURNING THE APPLIANCE ON AND OFF.
Turning on
• Move switch 1 (fig. A2) to the ON position; the LED 10 (fig. A) will light up green.
Turning o
• Move switch 1 (fig. A2) to the OFF position; the LED 10 (fig. A) will go out.
USEFUL TIPS FOR CUTTING
• Wash the hair as usual, dry and brush it in the direction of growth to untangle
any knots.
• After drying, do not use hairspray, mousse or gel.
• Start with the highest setting of the adjustable guide comb 7 (fig. A1) and gradu-
ally reduce the hair length setting.
• For best results, use the appliance against the direction of hair growth.
• If hair starts to clog the adjustable guide comb 7, remove the guide comb from
the appliance (see par. „Removing the adjustable guide comb“) and clean away
the hair (blow and/or brush out).
• Use the U-blade head 3 (fig. A1) to cut and finish.
• Use the precision design head 4 (fig. A1) for styling.
USING THE APPLIANCE
Use of the adjustable guide comb for the U-blade head.
To insert the adjustable U-blade guide comb 7 (fig. A) follow the instructions below:
• Check that the appliance is off.
• Slide the adjustable guide comb 7 onto the head until you hear it click into place
(fig. B1).
• Ensure that the guide comb 7 is correctly inserted in the slots on either side.
• With the adjustable guide comb 7 inserted, the appliance has 5 different hair
length settings: