User Manual: i-Series Interactive Signage
SW602242 Rev C, Page 6 of 35
Chapter 3: i-Series System Installation
Connector Panel & Interfaces
Check that the following items are present and in good condition:
i-Series system
Quick Install Guide
Power Brick
Cables
o North America power cord
o Europe power cord
Two (2) cable strain reliefs
Two (2) screws
The connectors are accessed by removing the cable security covers from the rear of the
i-Series system.
i-Series System Connections to an External Monitor
Connect a Micro-HDMI cable between the system and the monitor.
To Next Page
Loading...
