2 About these Instructions
Part 4 of the enCore FC1 manual has a modular design and consists of
individual volumes that document an Application Function Block . The
advantage of this feature is that you can specifically compile documents of
those AFBs used in your application.
The present volume 4.2 describes the basic functionalities and operation of
the Gas Quality AFB. Parameterization is explained in this document
only by way of example as the meaning of individual parameters is
documented in detail in the online help of enSuite.
Calling up the online help
In enSuite, you can call up the general help in the Assistent
window by clicking Show online help.
Open the context-sensitive help directly from the desired branch
in parameterization with [F1].
This part of documentation is intended for specialist personnel who are
responsible for the service activities of the following tasks after the
successful assembly of FC1 and installation of the current enSuite version
on PC:
• adaptation of device parameterization to the measuring task
• test of all data points and commissioning
• other service activities
The illustrations in this manual serve to depict the facts that are being
explained, and therefore may differ from the actual design depending on the
configuration of FC1 and enSuite.
Saving documentation on service-PC
This volume of the FC1 manual is provided in electronic format.
We recommend that you save the document on the PC intended
to be used for service activities so that it can be accessed at any
time.
To Next Page
Loading...
Need help?
General