Elsys ERS - Page 6

OPERATING MANUAL ERS
www.elsys.se 6
support@elsys.se
Sensor settings parameter’s
SplPer
The main time base for the
sensor. This is the interval
for the sensor to wake up
and sample data.
PirCfg
Configuration for the motion
detector.
Off: PIR sensor is off
Trigger: Sensor sends
package on motion
Count: Sensor counts
motions events between two
transmissions
TempPer
Temperature sample period.
Value * Timebase= Sample
time. Most of the time its
easiest to use 1 as period
and only change time base
PirPer
Value * Timebase= PIR
sample time.
SendPer
Value * Timebase= Send
time.
VddPer
Value * Timebase= Voltage
sample time.
LightPer
Value * Timebase= Light
sample time.
AppEui
Application ID (8bytes or 16
hex digits)
AppKey
Application unique key
(16bytes or 32hex digits)
Ota
Join mode, “over the air
activation” or
“personalization”. Value:true
or false
DevEui
Unique ID of the sensor
(8bytes or 16 hex digits)
AppSKey
Application session key.