RESISTORS AND CAPACITORS
Notes
- Part numbers are indicated for most mechanical parts.
please use this part number for parts order.
- IMPROTANT SAFETY NOTICE.
Components identified by
Q mark have special characteristics important for safety.
When replacing any of these components, use only manufacture's specified parts.
- The unit of resistance is ohm (
)
K=1000 (
), M=1000 (K )
- The unit of capacitance is MICROFARAD (
)
p=10
6
Numbering System of Resistor Example
CRD 25 F J 101
Type Wattage Shape Tolerance Value
Resistor Type Wattage Tolerance
CRD: Carbon
CRG: Metal Oxide
CRF: Metal Cement
20: 1/5W
25:1/4W
50:1/2W
1:1W
2:2W
3:3W
F:=
1%
J:=
5%
K:=
10%
PRODUCT SAFETY NOTICE
Many electical and mechanical parts in the appliance have special safety related characteristics.
These are often not evident from visual inspection nor the protection afforded by them necessarily can be obtained by using
replacement components rated for voltage, wattage, etc. replacement parts which have these special safety characteristics
are identified in this Service Manual.
Electical components having such features are identified by marking with a
Q on the schematics and on the parts list in
this Service Manual.
The use of substitute replacement component which does not have the same safety characteristics as the recommended
replacement one, shown in the parts list in this Service Manual, may create shock, fire, or other hazards. Product Safety is
continuously under review and new instructions are issused from time to time.
Numbering System of Capacitor
CCKT 1H 101 K B
Type Voltage Value Tolerance Peculiarity
Voltage
CCEA Type Other
HCB: Ceramic
CCC: Ceramic
CCK: Ceramic
HCQI: Polyester
CCEA: Elect
0J: 6.3V
1A:10V
1C:16V
1H:50V
1V:35V
1H: 50V DC
1: 125V DC
KC: 400V AC
C:
0.25
G: 2%
J:
5%
K: 10%
Z: +10%, -20%
Tolerance
Capacitor Type
To Next Page
Loading...