Eltax Voyager BT12 User Manual

Voyager BT12
Bass
To adjust bass level
Volume
Master volume
FM Antenna
Battery LED
indicator
(2)
Treble
To adjust treble level
Echo
To adjust micro echo depth
Micro Volume
To adjust micro volume
Guitar Volume
To adjust guitar volume
Micro 1
Wired micro input
Micro 2
Wired micro input
Guitar
Guitar wire input
(2)
LED indicator :
Charge (Green light) : battery in charge
Short (Red light) : battery is low and needs to be charged
Normal (Blue light) : battery ok
Micro Antenna
AC input
Power adaptor input
Power switch
AUX input
To plug external device
with RCA cable such as
smartphone or laptop
with mini-jack to RCA
(provided)
12V Battery IN
External 12V battery
input (not provided)
IR receiver
Playing functions
(1)
LED Power
Display
screen
SD/MMC Card
USB input
BATTERY
• Please charge the battery before using the Voyager BT outdoor (charging time : 8-10 hours). More charging time can damage
the battery and signicantly reduce its lifetime.
• When the battery is out of charge after being used for a short time, please change the built-in battery.
• If you don’t use the Voyager BT for a long time, please charge the battery every six months, to avoid the invalidity of the
battery.
MP3
• If you want to use the MP3 function, please format your USB disk as FAT-32 format on your computer rst.
• Please note that the Voyager BT will play the les according to the sequence on the USB disk. If you want to play a specic
sequence, you need to arrange the sequence as you want on the USB disk rst.

Eltax Voyager BT12 Specifications