Eltax Voyager BT12 User Manual

U/SD
Select USB or SD card mode
CH+
To change to next radio station
EQ
Equalizer : to change DSP
sound effect
Mode
Change BT/FM/AUX input
Mute
CH-
To change to previous radio station
Repeat
Scan
To scan the local radio station
and save it automatically
Use the numbers to input radio
station frequency manually or
track selection (USB/SD)
• Correctly install the battery.
• Turn the power switch to «ON». If the indicator LED does not ash or always lights, please check the battery. Battery voltage
may be insufcient, or the polarity is installed oppositely.
• Before using wireless microphone, please extend the rod antenna and make it vertically upward to ensure better reception.
• Adjust the microphone volume on the Voyager BT according to the sound volume when singing.
• Keep away the receiving antenna from metal surface, wall or other obstacles, as it can signicantely reduce the signal.
• The effective using distance of wireless microphone is within 30 meters. When the battery is low, or if there are too many
interferences, the using distance will be shortened accordingly.
• To enjoy the best singing effect, the distance between mouth and and microphone shall be 5-15cm, and the best angle is 45
degrees.
• When the battery is low, the indicator LED will light. Please change the battery in time in order not to affect the singing effect.
•Please keep away the microphone from the speaker to avoid Larsen effect.
• If you have purchased more than two sets of Voyager BT with wireless microphones and intend to use them together, please
select the varieties in different standard frequencies. If the frequency is identical, two Voyager BT can not be used until they
are separated from each other for 100 m, so as to avoid mutual interference and other troubles.
Remote control
Wireless microphone
Specications
VOYAGER BT12
Power : 350W
Sensitivity : 98dB
Battery : 12V/4.5Ah
Battery life : 6 hours
Alimentation included (220V-50Hz)
Dimensions (WxHxD) : 350 x 565 (825 with handle) x 320 mm
Weight : 10,5 kg
VOYAGER BT15
Power : 450W
Sensitivity : 99dB
Battery : 12V/4.5Ah
Battery life : 6 hours
Alimentation included (220V-50Hz)
Dimensions (WxHxD) : 480 x 735 (950 with handle) x 420 mm
Weight : 15 kg
All specications are subject to change without notice.

Eltax Voyager BT12 Specifications