_________________________________________________________________________________
GsmAlarm-500
Software ver. 1.15
GsmAlarm-500 (V1.15)
GSM Alarm and Remote Control System
FEATURES
•
6 inputs.
•
Up to 15 protection zones.
•
3 programmable low current outputs + 1 high current relay output.
•
5 users are notified.
•
20 programmable keypad access codes or iButton keys.
•
Possibility to transfer data to alarm monitoring station via GPRS channel by SIA DC-09 IP
protocol. AES128 encryption.
•
Possibility to connect to SmartCloud server. Monitoring and control of the system can be
performed from any computer or smart phone using a standard web browser.
•
Possibility to send information to alarm monitoring station using the Contact ID protocol
through GSM voice call.
•
Remote control using mobile phone keypad (through DTMF tones).
•
GSM JAMMING detection.
•
24 hour timer.
•
Two partial protection modes (STAY and SLEEP).
•
Possibility to divide the system into two independent partitions.
•
Possibility to connect up to 6 temperature sensors for temperature measurement.
•
Possibility to connect up to 4 keypads.
•
Info-carrying SMS showing state of each sensor, power supply voltage, GSM signal
strength.
• Programming and firmware upgrade via USB connection.
•
Remote programming over GPRS.
•
Integrated quad-band GSM module.
• Wide operating temperature range: -35 … +65ºC.
To Next Page
Need help?
General